diff --git a/setup-base-asahi.sh b/setup-base-asahi.sh
deleted file mode 100644
index de5ff7c..0000000
--- a/setup-base-asahi.sh
+++ /dev/null
@@ -1,139 +0,0 @@
-#!/bin/bash
-# macbook-setup/setup-base-asahi.sh
-# Basis-Setup fuer Asahi Linux (Fedora Remix) auf Apple Silicon M1
-# Fokus: Terminal-Umgebung (zsh, Tools, Screensaver)
-# System-spezifisches (XFCE, HiDPI, WireGuard, Energie) wird vor Ort gemacht
-# Verwendung: sudo bash setup-base-asahi.sh
-# Kann mehrfach ausgefuehrt werden (idempotent)
-
-# ── Farben ──────────────────────────────────────────────────────────────
-RED='\033[0;31m'; GREEN='\033[0;32m'; YELLOW='\033[1;33m'; NC='\033[0m'
-ok()   { echo -e "${GREEN}[OK] $*${NC}"; }
-warn() { echo -e "${YELLOW}[!!] $*${NC}"; }
-fail() { echo -e "${RED}[FAIL] $*${NC}"; }
-
-# ── Root-Check ─────────────────────────────────────────────────────────
-[[ $EUID -ne 0 ]] && { fail "Bitte als root ausfuehren (sudo)"; exit 1; }
-
-echo ""
-echo "============================================"
-echo " setup-base-asahi.sh fuer M1 (Asahi Linux)"
-echo " Terminal-Grundsetup"
-echo "============================================"
-
-# ── 1. sudoers ───────────────────────────────────────────────────────────
-echo -e "\n=== 1/7 sudoers ==="
-cat > /etc/sudoers <<'SUDOEOF'
-Defaults   env_reset
-Defaults   secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-
-root    ALL=(ALL:ALL) ALL
-%wheel  ALL=(ALL:ALL) ALL
-
-@includedir /etc/sudoers.d
-SUDOEOF
-chmod 440 /etc/sudoers
-echo "rene ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/rene
-chmod 440 /etc/sudoers.d/rene
-ok "sudoers: Linux-Standard + NOPASSWD fuer rene"
-
-# ── 2. Locale & Timezone ────────────────────────────────────────────────
-echo -e "\n=== 2/7 Locale & Timezone ==="
-dnf install -y glibc-langpack-de 2>/dev/null || true
-localectl set-locale LANG=de_DE.UTF-8
-timedatectl set-timezone Europe/Berlin 2>/dev/null || true
-ok "Locale: de_DE.UTF-8, Timezone: Europe/Berlin"
-
-# ── 3. Sleep verhindern waehrend Installation ───────────────────────────
-echo -e "\n=== 3/7 Sleep verhindern ==="
-systemctl mask sleep.target suspend.target hibernate.target hybrid-sleep.target 2>/dev/null || true
-ok "Sleep/Suspend deaktiviert (fuer Installation)"
-
-# ── 4. System aktualisieren ─────────────────────────────────────────────
-echo -e "\n=== 4/7 System aktualisieren ==="
-dnf upgrade -y || warn "dnf upgrade hatte Probleme"
-ok "System aktuell"
-
-# ── 5. Pakete installieren ──────────────────────────────────────────────
-echo -e "\n=== 5/7 Pakete installieren ==="
-
-# Basis-Tools
-dnf install -y \
-    git curl wget \
-    zsh neovim micro \
-    python3 python3-pip pipx \
-    nodejs npm \
-    openssh-server \
-    bc \
-|| warn "Einige Basis-Pakete konnten nicht installiert werden"
-
-# Terminal-Tools
-dnf install -y \
-    bat eza fd-find fzf ripgrep tldr ncdu duf \
-    zoxide \
-    htop btop \
-    fastfetch \
-|| warn "Einige Terminal-Tools konnten nicht installiert werden"
-
-# Spass-Tools
-dnf install -y \
-    cowsay fortune-mod \
-    cmatrix \
-    perl-Curses \
-|| warn "Einige Spass-Tools konnten nicht installiert werden"
-
-ok "Pakete installiert"
-
-# asciiquarium (Perl-basiert, nicht in Fedora-Repos)
-echo ""
-perl -MTerm::Animation -e1 2>/dev/null || cpan -T Term::Animation
-if ! command -v asciiquarium &>/dev/null; then
-    curl -fsSL https://robobunny.com/projects/asciiquarium/asciiquarium_1.1.tar.gz -o /tmp/asciiquarium.tar.gz \
-        && tar xzf /tmp/asciiquarium.tar.gz -C /tmp \
-        && cp /tmp/asciiquarium_1.1/asciiquarium /usr/local/bin/ \
-        && chmod +x /usr/local/bin/asciiquarium \
-        && ok "asciiquarium installiert" \
-        || warn "asciiquarium uebersprungen"
-    # Patch: beliebige Taste beendet asciiquarium (statt nur 'q')
-    if [ -f /usr/local/bin/asciiquarium ]; then
-        sed -i '/\$in eq .q.*quit/d' /usr/local/bin/asciiquarium
-        sed -i "s/elsif( \$in eq 'r'/if   ( \$in eq 'r'/" /usr/local/bin/asciiquarium
-        sed -i "/\$in eq 'p'.*paused/a\\\t\t\telsif( \$in ne ERR ) { quit(); }   # Any key exits" /usr/local/bin/asciiquarium
-    fi
-    rm -rf /tmp/asciiquarium*
-fi
-
-# ── 6. /etc/hosts ───────────────────────────────────────────────────────
-echo -e "\n=== 6/7 /etc/hosts ==="
-for entry in "10.47.11.10 dsm.motocamp.de" "10.47.11.23 git.motocamp.de"; do
-    host="${entry##* }"
-    if ! grep -q "$host" /etc/hosts; then
-        echo "$entry" >> /etc/hosts
-        ok "/etc/hosts: $host"
-    else
-        ok "/etc/hosts: $host (bereits vorhanden)"
-    fi
-done
-
-# ── 7. Services & Shell ─────────────────────────────────────────────────
-echo -e "\n=== 7/7 Services & Shell ==="
-systemctl enable sshd 2>/dev/null || true
-systemctl start sshd 2>/dev/null || true
-
-# zsh als Standard-Shell
-chsh -s /bin/zsh rene 2>/dev/null || true
-ok "sshd aktiviert, zsh als Standard-Shell"
-
-# Sleep wieder erlauben
-systemctl unmask sleep.target suspend.target hibernate.target hybrid-sleep.target 2>/dev/null || true
-
-# ── Zusammenfassung ──────────────────────────────────────────────────────
-echo ""
-echo "============================================"
-echo -e " ${GREEN}Terminal-Grundsetup abgeschlossen!${NC}"
-echo "============================================"
-echo ""
-echo "Naechste Schritte:"
-echo "  1. Ausloggen und als rene mit zsh neu einloggen"
-echo "  2. setup-desktop-asahi.sh ausfuehren (oh-my-zsh, Dotfiles, p10k)"
-echo "  3. System-Setup (XFCE, HiDPI, WireGuard etc.) vor Ort machen"
diff --git a/setup-desktop-asahi.sh b/setup-desktop-asahi.sh
deleted file mode 100644
index 38e40e1..0000000
--- a/setup-desktop-asahi.sh
+++ /dev/null
@@ -1,231 +0,0 @@
-#!/bin/bash
-# macbook-setup/setup-desktop-asahi.sh
-# Desktop-Setup fuer Asahi Linux (Fedora Remix) auf Apple Silicon M1
-# Braucht eine laufende Desktop-Session (XFCE) — NICHT in chroot ausfuehren!
-# Verwendung: bash setup-desktop-asahi.sh
-# Wird automatisch beim ersten Login gestartet (via Autostart)
-
-export LANG=en_US.UTF-8
-FORGEJO="https://git.motocamp.de"
-DOTFILES_REPO="$FORGEJO/rene/dotfiles-rene.git"
-
-# ── Farben ──────────────────────────────────────────────────────────────
-RED='\033[0;31m'; GREEN='\033[0;32m'; YELLOW='\033[1;33m'; NC='\033[0m'
-ok()   { echo -e "${GREEN}[OK] $*${NC}"; }
-warn() { echo -e "${YELLOW}[!!] $*${NC}"; }
-fail() { echo -e "${RED}[FAIL] $*${NC}"; }
-
-# ── Root-Check ───────────────────────────────────────────────────────────
-[[ $EUID -eq 0 ]] && { fail "Nicht als root ausfuehren!"; exit 1; }
-
-echo ""
-echo "============================================"
-echo " setup-desktop-asahi.sh startet"
-echo "============================================"
-
-# ── 1. oh-my-zsh ────────────────────────────────────────────────────────
-echo -e "\n=== 1/8 oh-my-zsh ==="
-if [[ ! -d ~/.oh-my-zsh ]]; then
-    sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)" "" --unattended
-fi
-ok "oh-my-zsh installiert"
-
-# ── 2. Zsh-Plugins & Powerlevel10k ──────────────────────────────────────
-echo -e "\n=== 2/8 Zsh-Plugins & Powerlevel10k ==="
-
-# zsh-syntax-highlighting
-ZSH_SHL_DIR="${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/plugins/zsh-syntax-highlighting"
-if [[ ! -d "$ZSH_SHL_DIR/.git" ]]; then
-    rm -rf "$ZSH_SHL_DIR"
-    git clone https://github.com/zsh-users/zsh-syntax-highlighting.git "$ZSH_SHL_DIR"
-fi
-ok "zsh-syntax-highlighting"
-
-# Powerlevel10k
-P10K_DIR="${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k"
-if [[ ! -d "$P10K_DIR/.git" ]]; then
-    rm -rf "$P10K_DIR"
-    git clone --depth=1 https://github.com/romkatv/powerlevel10k.git "$P10K_DIR"
-fi
-ok "Powerlevel10k"
-
-# ── 3. MesloLGS NF Font (Powerlevel10k-Icons) ───────────────────────────
-echo -e "\n=== 3/8 MesloLGS NF Font ==="
-FONT_DIR="$HOME/.local/share/fonts"
-mkdir -p "$FONT_DIR"
-FONT_BASE="https://github.com/romkatv/powerlevel10k-media/raw/master"
-for font in "MesloLGS NF Regular.ttf" "MesloLGS NF Bold.ttf" \
-            "MesloLGS NF Italic.ttf" "MesloLGS NF Bold Italic.ttf"; do
-    if [[ ! -f "$FONT_DIR/$font" ]]; then
-        curl -fsSL -o "$FONT_DIR/$font" "$FONT_BASE/${font// /%20}"
-    fi
-done
-fc-cache -f "$FONT_DIR" 2>/dev/null || true
-ok "MesloLGS NF Fonts installiert"
-
-# ── 4. npm global + Claude Code ─────────────────────────────────────────
-echo -e "\n=== 4/8 Claude Code ==="
-mkdir -p ~/.npm-global
-npm config set prefix '~/.npm-global'
-export PATH="$HOME/.npm-global/bin:$PATH"
-npm install -g @anthropic-ai/claude-code
-ok "Claude Code installiert"
-
-# ── 5. Flatpak-Apps (Brave + ggf. weitere) ──────────────────────────────
-echo -e "\n=== 5/8 Flatpak-Apps ==="
-flatpak remote-add --user --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
-
-# Brave Browser
-flatpak install --user -y flathub com.brave.Browser
-ok "Brave Browser installiert (Flatpak)"
-
-# PrusaSlicer — ARM64-Flatpak evtl. nicht verfuegbar
-if flatpak install --user -y flathub com.prusa3d.PrusaSlicer 2>/dev/null; then
-    ok "PrusaSlicer installiert (Flatpak)"
-else
-    warn "PrusaSlicer Flatpak nicht verfuegbar fuer ARM64 — ggf. aus Source bauen"
-fi
-
-# ── 6. PlatformIO (pipx) ────────────────────────────────────────────────
-echo -e "\n=== 6/8 PlatformIO ==="
-if ! command -v pio &>/dev/null; then
-    if pipx install platformio 2>/dev/null; then
-        pipx ensurepath
-        ok "PlatformIO installiert (pipx)"
-    else
-        warn "PlatformIO: Installation fehlgeschlagen (ARM64-Toolchains evtl. nicht verfuegbar)"
-    fi
-else
-    ok "PlatformIO bereits installiert"
-fi
-
-# ── 7. Dot-Files ────────────────────────────────────────────────────────
-echo -e "\n=== 7/8 Dot-Files ==="
-DOTFILES_DIR="$HOME/git-projekte/dotfiles-rene"
-if [[ ! -d "$DOTFILES_DIR" ]]; then
-    mkdir -p "$HOME/git-projekte"
-    git clone "$DOTFILES_REPO" "$DOTFILES_DIR"
-fi
-
-# Neovim
-if [[ -f "$DOTFILES_DIR/nvim/install-nvim-dotfiles.sh" ]]; then
-    bash "$DOTFILES_DIR/nvim/install-nvim-dotfiles.sh"
-    ok "Dot-Files: nvim"
-fi
-
-# Micro
-if [[ -f "$DOTFILES_DIR/micro/install-micro-dotfiles.sh" ]]; then
-    bash "$DOTFILES_DIR/micro/install-micro-dotfiles.sh"
-    ok "Dot-Files: micro"
-fi
-
-# oh-my-zsh custom (platformio.zsh etc.)
-if [[ -d "$DOTFILES_DIR/oh-my-zsh/custom" ]] && [[ -d ~/.oh-my-zsh/custom ]]; then
-    for f in "$DOTFILES_DIR/oh-my-zsh/custom"/*.zsh; do
-        [[ -f "$f" ]] && ln -sf "$f" ~/.oh-my-zsh/custom/
-    done
-    ok "Dot-Files: oh-my-zsh custom"
-fi
-
-# heic-scripts nach ~/bin
-mkdir -p ~/bin
-if [[ -d "$DOTFILES_DIR/heic-scripts" ]]; then
-    for script in "$DOTFILES_DIR/heic-scripts"/*; do
-        [[ -f "$script" ]] && chmod +x "$script" && ln -sf "$script" ~/bin/
-    done
-    ok "Dot-Files: heic-scripts -> ~/bin"
-fi
-
-# git-check-all.sh + git-update-all.sh nach ~/
-if [[ -d "$DOTFILES_DIR/bin" ]]; then
-    for script in "$DOTFILES_DIR/bin"/*; do
-        [[ -f "$script" ]] && chmod +x "$script" && ln -sf "$script" ~/
-    done
-    ok "Dot-Files: git-check-all.sh, git-update-all.sh, git-sync-all.sh -> ~/"
-fi
-
-# .zshrc (Symlink aus dotfiles-rene)
-if [[ -f "$DOTFILES_DIR/zsh/install-zsh-dotfiles.sh" ]]; then
-    bash "$DOTFILES_DIR/zsh/install-zsh-dotfiles.sh"
-    ok "Dot-Files: .zshrc"
-fi
-
-# ~/.secrets fuer API-Keys (source in .zshrc eintragen)
-if ! grep -q 'source ~/.secrets' ~/.zshrc 2>/dev/null; then
-    echo '' >> ~/.zshrc
-    echo '# API-Keys (nicht ins Repo!)' >> ~/.zshrc
-    echo '[[ -f ~/.secrets ]] && source ~/.secrets' >> ~/.zshrc
-    ok "source ~/.secrets in .zshrc eingetragen"
-fi
-
-# .p10k.zsh
-if [[ -f "$DOTFILES_DIR/.p10k.zsh" ]]; then
-    cp "$DOTFILES_DIR/.p10k.zsh" ~/.p10k.zsh
-    ok "Dot-Files: .p10k.zsh"
-else
-    warn ".p10k.zsh nicht im Dotfiles-Repo — beim ersten zsh-Start 'p10k configure' ausfuehren"
-fi
-
-# ── 8. XFCE-Einstellungen ───────────────────────────────────────────────
-echo -e "\n=== 8/8 XFCE-Einstellungen ==="
-
-# Keyboard: XFCE soll System-Layout respektieren
-if command -v xfconf-query &>/dev/null; then
-    xfconf-query -c keyboard-layout -p /Default/XkbDisable -n -t bool -s true 2>/dev/null || true
-    ok "XFCE Keyboard: System-Layout wird verwendet"
-fi
-
-# Energieeinstellungen
-if command -v xfconf-query &>/dev/null; then
-    xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/dpms-on-ac-off    -s 0      --create -t int
-    xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/dpms-on-ac-sleep  -s 0      --create -t int
-    xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/blank-on-ac       -s 0      --create -t int
-    xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/blank-on-battery       -s 5  --create -t int
-    xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/dpms-on-battery-sleep -s 6  --create -t int
-    xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/dpms-on-battery-off   -s 7  --create -t int
-    ok "XFCE Power Manager konfiguriert"
-else
-    warn "xfconf-query nicht gefunden — XFCE Energieeinstellungen uebersprungen"
-fi
-
-# XFCE Terminal: MesloLGS NF als Schriftart setzen
-XFCE_TERM_RC="$HOME/.config/xfce4/terminal/terminalrc"
-if [[ -d "$HOME/.config/xfce4" ]]; then
-    mkdir -p "$(dirname "$XFCE_TERM_RC")"
-    if [[ -f "$XFCE_TERM_RC" ]]; then
-        sed -i 's/^FontName=.*/FontName=MesloLGS NF 11/' "$XFCE_TERM_RC" 2>/dev/null || true
-    else
-        cat > "$XFCE_TERM_RC" <<'TERMEOF'
-[Configuration]
-FontName=MesloLGS NF 11
-MiscAlwaysShowTabs=FALSE
-MiscBell=FALSE
-MiscDefaultGeometry=120x35
-ScrollingBar=TERMINAL_SCROLLBAR_NONE
-TERMEOF
-    fi
-    ok "XFCE Terminal: MesloLGS NF Schriftart"
-fi
-
-# ── Autostart entfernen ─────────────────────────────────────────────────
-AUTOSTART_FILE="$HOME/.config/autostart/macbook-setup-desktop.desktop"
-if [[ -f "$AUTOSTART_FILE" ]]; then
-    rm "$AUTOSTART_FILE"
-    ok "Firstboot-Autostart entfernt"
-fi
-
-# ── Zusammenfassung ──────────────────────────────────────────────────────
-echo ""
-echo "============================================"
-echo -e " ${GREEN}Desktop-Setup abgeschlossen!${NC}"
-echo "============================================"
-echo ""
-warn "Noch manuell erledigen:"
-echo "  1. Synology Drive Client installieren (falls ARM64-Version verfuegbar)"
-echo "  2. Thunderbird starten -> Profil aus Synology Drive einbinden"
-echo "  3. Brave starten -> Synchronisation einrichten"
-echo "  4. Falls p10k-Icons fehlen: Terminal-Schriftart auf 'MesloLGS NF' setzen"
-echo "  5. API-Key aus Bitwarden in ~/.secrets eintragen:"
-echo "     echo 'export ANTHROPIC_API_KEY=\"sk-ant-...\"' > ~/.secrets && chmod 600 ~/.secrets"
-echo "  6. Falls PrusaSlicer fehlt: aus Source bauen (kein ARM64-Flatpak)"
-echo "  7. PlatformIO testen: ESP32-Toolchains evtl. nur x86 verfuegbar"